Cruisair Split Gas Systems
Split air conditioning systems have the condensing unit and air handler installed in different locations.
- The condensing unit is mounted in the engine room or other mechanical space.
- The air handler (also called the evaporator) is installed in the living area. Two air handlers can connect to one condensing unit.
Split systems are found on boats up to 24 meters (80 feet), limited only by the number of condensing units that will fit and by the 15 meter (50 foot) maximum length of copper tubing between the condensing unit and air handler.
Split system advantages:
- Less space needed in the living area for the air handlers.
- Quieter because the compressor is in the engine room.
- A wide selection of air handler types.
Cruisair R-Type Remote Condensing Units.
RX Type Condensing Units (SMX II Controls) Includes SMX II power/logic box. SMXir or SMXht keypad, CXP and TSEP cables are sold separately. (R-417 gas replaces R-22) (Replaces old style F, J, WFAH, condensing units)
Description | Description |
RX5 115V | RX16 115V |
RX7 115V | RX16C 230V |
RX7C 230V | RX20C 230V |
RX10 115V | RX24C 230V |
RX10C 230V | RX30C 230V |
RX12 115V | RX36C 230V |
RX12C 230V | RX48C 230V |
R Type Condensing Units. (Manual Controls). (R-417 gas replaces R-22)
Description | Description |
R7 115V | R16 115V |
R7C 230V | R16C 230V |
R10 115V | R20C 230V |
R10C 230V | R24C 230V |
R12 115V | R30C 230V |
R12C 230V | R36C 230V |
REU Cooling/Heating Units. Draw through, ductable units include hose ring and rotatable, high velocity blower. Replaces EBO, EBA, and EBU cooling/heating units.
Description | Description |
REU4 115V | REU4C 230V |
REU5 115V | REU5C 230V |
REU7 115V | REU7C 230V |
REU8 115V | REU8C 230V |
REU10 115V | REU10C 230V |
REU12 115V | REU12C 230V |
REU16 115V | REU16C 230V |
REU24C 230V | REU30C 230V |
Prices do not include shipping.
NEW! Emerald Series Condensing Units.
Features
- Up to 14% increase in BTU capacity.
- Up to 27% amperage reduction (6K-16K only).
- Up to 17% reduced startup amps.
- Up to 18% smaller.
- Up to 15% lighter.
- Up to 85% reduction in condensate drainage.
- Up to 15 minutes faster to install.
- Up to 27.5% amperage reduction with both the Emerald TurboVap evaporator and Emerald Condenser.
- Square chassis for easy installation in tight locations.
- Three mounting options adapt to installation environments.
- Composite drain pan will not rust.
- Built-in refrigerant-line filter drier reduces installation time and protects compressor from moisture and contaminants.
- High-performance engineering maximizes the efficiency of R-410A refrigerant.
- Available in 11 capacities ranging from 6K to 72K BTUs.
- To retrofit to an existing system all refrigerant line sets and evaporators must be upgraded to 410A specifications.
NEW! Emerald Turbovap Evaporators.
Features
- Up to 28% reduced amperage.
- Up to 85% reduction of standing water in the drain pan.
- Up to 14% increase in cooling capacity.
- Up to 15% reduced weight.
- Up to 17% reduction in height.
- Up to 19% increased air flow CFM.
- Positive-flow, anti-slosh, rust-free drain pan ensures condensate does not spill.
- Installation time reduced by 15 minutes.
- Single screw for 270 degree blower rotation.
- No blower-motor overhang reduces depth.
- Vibration-isolation mounting system reduces noise.
- Pair it with an Emerald Condenser for maximum performance.
- Available in 4K, 6K, 8K, 10K, 12K, and 16K BTU/hr capacities.
- 115V or 230V models.
- Engineered to maximize the thermodynamic properties of R-410A, an environmentally safe refrigerant.
