Marine Air Central Systems
Split air conditioning systems have the condensing unit and air handler installed in different locations.
- The condensing unit is mounted in the engine room or other mechanical space.
- The air handler (also called the evaporator) is installed in the living area. Two air handlers can connect to one condensing unit.
Split systems are found on boats up to 24 meters (80 feet), limited only by the number of condensing units that will fit and by the 15 meter (50 foot) maximum length of copper tubing between the condensing unit and air handler.
Split system advantages:
- Less space needed in the living area for the air handlers.
- Quieter because the compressor is in the engine room.
- A wide selection of air handler types.
Marine Air CS Series Condensers
With High-Efficiency Compressors, the CS series of condensing units provide heating and cooling ability in a highly efficient package. The hermetically sealed, high-efficiency compressor reduces amp draw, while pressure switches, thermal-overload, and start components provide constant system protection and proper operation.
The symmetrical base design provides optimum space efficiency and installataion flexibility for easy handling and positioning of the unit. Two sets of vibration isolators ensure quiet operation.
Marine Air CS Series Multiton Condensing Units
- Models available in 24K, 30K, 36K, 48K, and 60K BTU/Hr (60Hz and 50Hz).
- High-efficiency system with reduced amp draw.
- Valves and switches provide load balancing and constant system protection.
- Symmetrical base for installation flexibility and ease of handling.
- Remote-mountable, moisture-resistant and corrosion-resistant electrical box.
- Passport I/O circuit board included in electrical box of CSD systems.
- Factory pre-charged, tested, and leak-checked prior to shipping.
- Meets or exceeds all applicable standards and regulations.
- CS Multiton Condensing Unit Specification Sheet
Marine Air EFD Series Evaporaters
With quiet & efficient blowers, this direct expansion air handler has a compact modular design. For maximum efficiency, the plenum chambers are increased and the coils have enhanced fins and rifled tubing. The centrifugal blowers are quiet and efficient with fully insulated housings. For installation flexibility, the blower rotates to horizontal or vertical positions.
Thermoplastic mounting rings enable easy installation of ducting or transition boxes. The condensate drain pan includes two 1/2" FPT drain hook-ups, and is insulated to prevent sweating.
- Models available in 4K, 6K, 9K, 12K, and 16K BTU/hr (115V and 230V), as well as 18K, and 24K BTU/hr (230V only).
- Compact modular design with increased efficiency.
- Easy disassembly for component access.
- Quiet, efficient blowers rotate to vertical or horizontal positions.
- Insulated drain pan prevents sweating and includes two ½" FPT drain hook-ups.
- Factory pre-charged, tested, and leak-checked prior to shipping.
- Meets or exceeds all applicable standards and regulations.
- EFD Specification Sheet
